NFO Series
Micro ODF
5 models
- Compact size takes up less wall space for installation
- Dust-proof design with protective cover
- Ability to allow cables to enter from four sides of the unit
- Inner slack storage area ensures minimum bend radius compliance
- Easy to re-enter with a minimum of tools, saving time and cost
- Accepts standard SC Simplex and LC Duplex Adapters
- Cable management can be connected without cutting (with express port)
- Standard connectors can be used for direct Termination
- Inner tray available to house splice sleeves
Overview
The Fiber Optic Outlet is used in FTTH indoor applications. It enables termination of fiber optic cables within residences and commercial buildings. The bend radius of the individual fibers does not fall below 15mm, thereby minimizing the signal transmission losses.
Applications
- Widely used in FTTH access Network
Specifications
| Size (L*W*H) (mm) | The dimension of 2 port micro ODF is 86*86*24mm; The dimension of 4 port micro ODF is 80.63*100.63*29mm |
|---|---|
| Application | 3.0 x 2.0 mm drop cable or indoor cable |
| Fiber diameter | 125µm ( 652 & 657 ) |
| Tight cladding diameter | 250µm & 900µm |
| Mode of application | Single mode, Simplex and Duplex |
| Tensile strength | >50 N |
| End-use temperature | -40 to 85°C |
| Adaptor Type | SC and LC |
| Insertion loss | ≤0.2dB ( 1310nm & 1550nm ) |
| Output | 02/04 |
Eligible for the D-Link Cabling System 25-year Warranty when the installation is designed, supplied, installed and tested by a D-Link approved partner.
Ordering information
Available models
| PART CODE | DESCRIPTION |
|---|---|
| NFO-FXDXX02 | Blank Two port Fiber Optic micro ODF |
| NFO-FXSSC02 | 02 port micro ODF loaded with 02 simplex SC/APC adapters |
| NFO-FXDLC02 | 02 port micro ODF loaded with 02 Duplex LC/APC adapters |
| NFO-FXDXX04 | Blank Four port Fiber Optic micro ODF |
| NFO-FXDLCSSC04 | Four port Fiber Optic micro ODF with 02 Simplex SC/APC Adapters and 01 Duplex LC/APC Adapters |