Connect room devices
One Gigabit PoE uplink connects the access point to the network. Two Gigabit downlink ports connect wired devices, with one downlink providing PoE output of up to 12 W.
DAP-2622
AC1200 Dual-Band Faceplate Access Point
- AC1200 Wireless AC Wave 2 connectivity
- Three Gigabit Ethernet interfaces
- 802.3at PoE input
- PoE output supports up to 12 W
Overview
Centralised control in a wall-plate design
Nuclias Connect provides management, monitoring and troubleshooting. WPA/WPA2 Personal and Enterprise encryption, MAC address filtering, WLAN partitioning and a captive portal help control network access.
DAP-2622
Specifications
| Wireless standard | IEEE 802.11a/b/g/n/ac |
|---|---|
| Wireless signal rate | Up to 1200 Mbps |
| Ethernet | 1 x Gigabit PoE uplink; 1 x Gigabit PoE-out downlink; 1 x Gigabit Ethernet downlink |
| Antennas | 2 internal antennas |
| Power input | IEEE 802.3at PoE |
| PoE output | Up to 12 W |
| Maximum power consumption | 9.5 W; 21.5 W including PoE output |
| Management | D-Link Nuclias Connect; web, SSL, SSH and Telnet |
| Dimensions | 154.1 x 95 x 27.4 mm |
| Operating temperature | 0 to 40 °C |
Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.
Support
Downloads
These downloads are for Egypt. Outside Egypt, use the D-Link Middle East website.
