DCS-F7200FT
Face Recognition Access Control Terminal with Digital Temperature Measurement Module
DCS-F5714
DCS-F5714
| Sensor | 1/3", 4.0 megapixel, progressive scan, CMOS | ||
|---|---|---|---|
| Lens | 2.8~12mm,manual zoom lens | ||
| Angle of View (H) | 91.0°~27° | ||
| Angle of View (V) | 54.4°~13.7° | ||
| Angle of View (O) | 118.3°~33.2° | ||
| Adjustment angle | Pan: 0°~360° \ | Tilt: 0°~90° \ | Rotate:0°~360° |
| Shutter | Auto/Manual, 1~1/100000 s | ||
| Minimum Illumination | Colour: 0.01 Lux (F1.6, AGC ON) 0 Lux with IR on | ||
| Digital noise reduction | 2D/3D DNR | ||
| Day/Night | IR-cut filter with auto switch (ICR) | ||
| S/N | >52dB | ||
| IR Range | Up to 30m (98 ft) IR range | ||
| WDR | DWDR | ||
| Video Compression | Ultra 265,H.265, H.264, MJPEG | ||
| H.264 code profile | Baseline profile, Main Profile, High Profile | ||
| Frame Rate | Main Stream:4MP: Max. 20fps; Sub Stream:720P (1280*720): Max.30 fps; Third Stream: D1 (704×576): Max.30fps | ||
| HLC | Supported | ||
| BLC | Supported | ||
| OSD | Up to 4 OSDs | ||
| Privacy Mask | Up to 8 areas | ||
| ROI | Up to 2 areas | ||
| Motion Detection | Up to 4 areas | ||
| Protocols | IPv4,IGMP,ICMP,ARP,TCP,UDP,DHCP, RTP,RTSP,RTCP,DNS,DDNS,NTP,FTP,UPnP,HTTP,HTTPS,SMTP, SSL | ||
| Compatible Integration | ONVIF(Profile S, Profile G), API | ||
| Network | 1 RJ45 100M Base-TX Ethernet | ||
| Edge Storage | MicroSD, up to 128GB | ||
| Power | 12 V DC±25%, PoE (IEEE802.3 af) Power consumption: Max 6.5W | ||
| Dimensions (L × W × H) | 253.4×86×71.7mm(9.98"×3.4"×2.8") | ||
| Weight | 1kg(2.2lb) | ||
| Working Environment | -30°C ~ +60°C (-22°F ~ 140°F), Humidity :10%~90% RH(non-condensing) | ||
| Ingress Protection | IP67 |
Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.