DCS-F7200FT

Face Recognition Access Control Terminal with Digital Temperature Measurement Module

Support non-contact detection, support warning people with abnormal body temperature
Support body temperature detection and personnel information binding, which can quickly confirm personnel information and do body temperature detection
Support configuring the temperature detection threshold value, and personnel access authority can be configured through the temperature detection threshold value.
Non-contact temperature detection module: measurement range is between 30℃ and 45℃, measurement accuracy can reach 0.1℃, measurement deviation is less than or equal to 0.3℃, and measurement distance is 1 meter.
Deep learning algorithm model based on D-Link independent intellectual property rights, face recognition accuracy rate > 99%, false rate < 1%
Built-in deep learning dedicated chip, supports local offline recognition, 10,000 face capacity, face whitelist (1:N)
Fastest recognition time is 0.2 seconds; various model merge modes are used to reduce false rate and increase pass rate.
WDR, 2MP (1080P) low illumination wide-angle camera and F1.6 large aperture lens for capturing high quality image with various complex lighting scenes
Support live detection based on deep learning algorithm, effective against fraud such as photo and video
Support face metering and human metering for fast adapting to ambient light
Suggested height for face recognition: between 0.8m and 2.2m, face recognition distance: 0.2m to 2.9m
Support screen sleep mode, keep the minimum brightness to prevent glare at night
Support add up to 6 photos of the base library for a single person
Support video capture, support ONVIF protocol
Support face, card, password and QR code authentication to control door open
Two-way audio with indoor monitor
Built-in 4 GB eMMC front end storage, stable and reliable, up to 30,000 events capacity
Support tamper protection, door open timeout and time exceed alarm function to keep door opening during fire alarm active

Where to buy Download datasheet View specifications

Overview

DCS-F7200FT Digital temperature measurement face recognition access control terminal is a kind of access control device with precise recognition rate, large storage capacity and fast recognition, which integrates face recognition technology and non-contact temperature detection technology.

The digital temperature measurement module supports rapid body temperature detection. Thus, the product can achieve face recognition and temperature detection at the same time, and support warning people with abnormal body temperature. It can be widely applied in the crowded places, such as smart communities, schools, office buildings, hospitals and other important areas.

Specification
Operating System	Linux
Face Recognition Accuracy Rate	>99%
Face Recognition Time	200ms
Face Capacity	10,000
Card Capacity	100,000
Storage Capacity	4GB
Event Capacity	30,000
Measurement Range	30℃ - 45℃
Measurement Accuracy	0.1℃
Measurement Deviation	≤±0.3℃
Measurement Distance	1m
Authentication Mode	Face Whitelist: (1:N) Card: (1:N) Face + Body temperature
Door Opening Method	Face, Password, QR code, Card
Communication Mode	10/100Mbps adaptive network port
Card type	Mifare Card
User Management	Support user library addition, deletion, update
Record Management	Support local recording and real-time upload
Interface	LAN×1 Wiegand Input×1 Wiegand Output×1 RS485×1 Alarm Input×2 Alarm Output×1 USB2.0×1 Lock×1 Door Contact×1 Exit Button×1
Power Supply	Input 12V±25% DC
Screen	Touch Screen, Size: 7 inch Resolution: 600×1024
Camera	Dual Lens, 2MP, 1080P
Supplement Light	LED soft light and infrared light
Dimensions (L×W×H)	134.0mm×33.0mm×305.0mm
Working Environment	For access control terminal: −20℃~ +65℃, Relative Humidity<95% (non-condensing)
Protection Level	Both terminal and module: IP 54
Application Situation	Indoor, no wind

Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.

Datasheets