The DLS-F1100-26PSD-SI is a 26 port Cloud Managed Gigabit Switch with 24 10/100/1000 Mbps PoE ports, 2 Gigabit SFP uplink ports. This Switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs), IP cameras.
DLS-F1100-26PSD-SI
26 Port Layer 2 Gigabit Cloud Managed PoE+ Switch
- Cloud Management
- Zero-Touch Deployment
- Intuitive Interface
- Unlimited Scalability
- 24 100/1000Mbps POE ports
- 2 Gigabit SFP Ports
- 250 watts available for PoE
- End-to-End Encryption
- Event Log and Change Log
- Over-the-Air Firmware Upgrades
Overview
D-Lite Cloud Management
The user can access D-Lite Cloud from the web to manage and configure off-site locations. The internet traffic does not pass through the cloud, compliant with the latest data protection and privacy regulations. Security is assured with an out-of-band, SSL-encrypted management plane backed with a 99.99% uptime service level agreement. If the Cloud service is down this will not affect the service of local locations.
Easy-to-Configure APs and Switches
Users no longer have to configure each access point individually; D-Lite Cloud offers an intuitive cloud interface to configure your access points in bulk or individually, ideal for lean IT businesses. Settings are saved on the cloud and pushed to the devices. The D-Lite cloud-managed switch enables lean IT to easily provision, manage and even troubleshoot their entire network. Port configurations can be easily configured individually or performed in a batch.
Easy and Rapid AP and Switch Deployment
After pre-configuring the AP or Switch towards a certain profile, the AP and Switch can then be quickly deployed remotely and be up and running without configuration at the target site.
Unlimited Scalability
With D-Lite Cloud, the controller is managed in the cloud from a single centralized interface and no longer faces hardware scalability limitations commonly found in traditional on-premise controllers. D-Lite Cloud supports unlimited access points and switches, ideal for small to medium-sized businesses.
Multi-Site Management
From the centralized interface, IT professionals and System Integrators can manage multiple remote sites with features including creating accounts, generating reports, and remotely installing, managing and monitoring the wireless and wired infrastructure for multiple users – all with minimal commitment in terms of training time, IT resources and capital.
Intuitive Dashboard
An Intuitive and Comprehensive Dashboard to Configure and Monitor your Network
- Online and Offline Devices
- Number of Clients
- PoE /Power Status
- Client Traffic and Analysis view
- Device Traffic and Analysis view
- CPU and Memory Usage
- Alert Notifications
D-Lite APP for Easy Deployment and Monitoring
D-Lite Cloud offers an APP to configure and monitor your network on the go.
- Quick Setup via QR Code
- Real-Time Monitoring
- Comprehensive Configurations
Power Your Devices
- Supports IEEE 802.3af/at PoE to Power PoE capable Network devices via ethernet cables without need for power adapters.
Robust PoE Power Budget
- Supports IEEE 802.3af/at standard
- Each port supports up to 30 watts, with a total PoE budget of 250 watts
Gigabit High-Speed Networking
- Gigabit ports allow you to connect up 24 devices for fast file transfers and smooth media streaming
- Two SFP uplink ports allow for additional connections to storage or an uplink network
Eco-friendly and Economical
- Low-cost, innovative design runs reliably and quietly, saving energy and cutting costs without sacrificing performance.
Superior Connectivity
- 24 100/1000Mbps POE ports
- 2 Gigabit SFP Ports
- 250 watts available for PoE
- Flow control for protection against data loss
Standards
- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted pair copper)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper)
- IEEE 802.3z 1000 BASE-X (fiber-optic)
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet
Power over Ethernet (PoE)
- The DLS-F1100-26PSD-SI supports both IEEE 802.3at and IEEE 802.3af PoE protocol.
- A total PoE budget of 250 watts allows users to attach an IEEE 802.3af-compliant device to the DLS-F1100-26PSD-SI without requiring additional power.
- PoE is especially suitable for devices that are far from power outlets or when users want to minimize the clutter of extra cables as power is supplied via the Ethernet cables themselves.
Easy to Use
- Plug-and-play installation
- Zero-Touch provisioning
- IEEE 802.3x Flow Control
- Auto MDI/MDIX crossover for all ports
DLS-F1100-26PSD-SI
Specifications
| Network Interface | 24 10/100/1000 Mbps PoE RJ45 ports (port1~port24) 2 Gigabit SFP Ports |
|---|---|
| Console Port | RJ45 |
| Transmission Rate | 10/100/1000Mbps Each port supports MDI/MDIX auto-flip and auto-negotiation Network interface: 10BASE-T or 100BASE-TX, 1000BASE-T Ethernet RJ-45 port |
| Protocols and Standards | IEEE802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3z 1000 BASE-X ANSI/IEEE 802.3 NWay auto-negotiation IEEE802.3x Flow Control IEEE 802.3af/at standard |
| Switching Capacity | 52 Gbps |
| Packet Forwarding | 38.688 Mpps |
| LED's Indicator | Power, SYS LINK/ACT, PoE |
| PoE Budget | 250 W |
| MAC Address Table | 8K Entries |
| Power | 100-240 VAC, 50-60 Hz |
| Maximum Power Consumption | 270.84 W (PoE on) 20.84 W (PoE off) |
| Standby Power Consumption | 7.4 W |
| Lightning Protection | 6 KV |
| Protocol Standard | IEEE 802.3: Ethernet Media Access Control (MAC) Protocol IEEE 802.3i: 10BASE-T Ethernet IEEE 802.3u: 100BASE-TX Fast Ethernet IEEE 802.3ab: 1000BASE-T Gigabit Ethernet IEEE 802.3z: 1000BASE-X Gigabit Ethernet (fiber) IEEE 802.3ad: Standard method for performing link aggregation IEEE 802.3x: flow control IEEE 802.1p: LAN Layer 2 QoS/CoS protocol for traffic priority (multicast filtering) IEEE 802.1d: STP Spanning tree IEEE 802.1s: MSTP Spanning tree IEEE 802.1w: RSTP Spanning tree IEEE 802.3af/at IEEE 802.1AB: LLDP |
| DHCP | DHCP Snooping |
| VLAN | 4K VLAN MAC VLAN, IP VLAN, Protocol VLAN VLAN translation |
| MAC Address Table (Software Specification) | MAC address learning and aging automatically Static, dynamic MAC ageing time |
| Security | Password protection HTTPS, SSLv3, TLS v1, SSH v1/v2 IP-MAC-PORT binding IP source protection, DoS protection DHCP Snooping, DHCP attack protection 802.1X, AAA Port isolation CPU protection Mac Address Count Limit |
| POE Management | POE power limit POE status view PoE port priority PoE power supply time period |
| Access control (ACL) | Standard and Extended ACL |
| Port Mirroring | Port base mirror support ingress, egress, both Support 1:1 and N:1 RSPAN |
| Quality of Service (QoS) | 8 port queues Port priority, 802.1p priority, DSCP priority SP, WRR, WFQ Priority scheduling algorithm |
| Spanning Tree | STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE 802.1s) protocol MSTP supports 64 instances Root Bridge Protection, TC protection, BPDU protection |
| Multicast | IGMP v1/v2 Snooping Fast leave mechanism Packet statistics, and unknown multicast discards |
| Storm Suppression | Multicast suppression Broadcast suppression Unknown unicast suppression |
| Link Aggregation | Static aggregation Dynamic aggregation IP, MAC, and hybrid load balancing modes Up to 32 aggregation groups |
| Discovery | LLDP(802.1ab) |
| IPv6 | IPv6 Ping, IPv6 Tracert, IPv6 Telnet, IPv6 SSH, IPv6 SSL |
| Management and Maintenance | Cloud Management WEB network management (HTTP, HTTPS, SSL V3) CLI (Telnet, SSH V1/V2, local serial port) SNMP V1/V2/V3 LLDP, RMON IP source protection, DoS protection CPU monitoring, memory monitoring System log, Grading Warning Ping, Tracert Detection, Cable Detection |
| Physical Characteristics | Dimensions (LxWxH): 440 x 180 x 44mm Weight: 2600g |
| Environmental Parameter | Operating Temperature: 0 to 40 °C (32 to 104 °F) Operating Humidity: 10% to 90% non-condensing |
Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.