D-Link

DMC-F1000 SERIES

Industrial Gigabit Ethernet to Fiber Media Converter

  • Available in both SC and SFP Fiber Connectors
  • Redundant Power Input
  • Jumbo packets up to 10K bytes
  • Link Fault Pass-Through (LFP)
  • Operating Temperature: -10°C to +70°C
Where to buyDownload datasheetView specifications

Overview

The DMC-F Gigabit Series is a lite Industrial Gigabit Ethernet to Fiber Converter providing media conversion between 10/100/1000BASE-T(X) and 100/1000 BASE-(F)X (available in both SC and SFP fiber connectors). Whether you’re upgrading your system or simply replacing an obsolete device with a newer model, DMC-F Gigabit series ensures that the process is both easy and cost-efficient.

On top of basic media conversion, the DMC-F Gigabit Series comes with a DIP switch to configure or enable more advanced functions including fiber speed, fiber auto negotiation, link fail pass-through, and jumbo frame limitation to allow maximal flexibility. Although small and slim, it is no doubt rugged and ready for any application.

DMC-F1000 SERIES

Specifications

Specification
SpecificationDMC-F550G1DMC-F1000G1DMC-F1000G1-SFP
DescriptionIndustrial Gigabit Ethernet-to-Fiber Media Converter, multimode, SC connector, Link Fault Pass-Through, Auto Speed, 550 MIndustrial Gigabit Ethernet-to-Fiber Media Converter, single-mode, SC connector, Link Fault Pass-Through, Auto Speed, 10 KMIndustrial Gigabit Ethernet-to-Fiber Media Converter, Link Fault Pass-Through, Auto Speed, SFP
StandardIEEE 802.3 for 10BASE-T IEEE 802.3u for 100BASE-T(X) and 100BASE-FX IEEE 802.3ab for 1000BASE-T(X) IEEE 802.3z for 1000BASE-XIEEE 802.3 for 10BASE-T IEEE 802.3u for 100BASE-T(X) and 100BASE-FX IEEE 802.3ab for 1000BASE-T(X) IEEE 802.3z for 1000BASE-XIEEE 802.3 for 10BASE-T IEEE 802.3u for 100BASE-T(X) and 100BASE-FX IEEE 802.3ab for 1000BASE-T(X) IEEE 802.3z for 1000BASE-X
RJ45 Ports10/100/1000BASE-T(X) auto negotiation speed10/100/1000BASE-T(X) auto negotiation speed10/100/1000BASE-T(X) auto negotiation speed
Fiber Ports100/1000BASE-(F)X100/1000BASE-(F)XSFP Slot
LED IndicatorsPWR1, PWR2, F_Mode, Fx_Link, LLCF_ON, Tx_LLCF, Fx_LLCFPWR1, PWR2, F_Mode, Fx_Link, LLCF_ON, Tx_LLCF, Fx_LLCFPWR1, PWR2, F_Mode, Fx_Link, LLCF_ON, Tx_LLCF, Fx_LLCF
DIP SwitchSpeed mode, Link Transparency, Fiber Auto Negotiation, Jumbo FrameSpeed mode, Link Transparency, Fiber Auto Negotiation, Jumbo FrameSpeed mode, Link Transparency, Fiber Auto Negotiation, Jumbo Frame
Input Voltage9-48 VDC9-48 VDC9-48 VDC
ConnectorRemovable 5-pin Terminal BlockRemovable 5-pin Terminal BlockRemovable 5-pin Terminal Block
Reverse Polarity ProtectionPresentPresentPresent
HousingMetal, IP30 protectionMetal, IP30 protectionMetal, IP30 protection
Dimensions (W x H x D)32mm x 90mm x 110mm (1.26 x 3.54 x 4.33 in)32mm x 90mm x 110mm (1.26 x 3.54 x 4.33 in)32mm x 90mm x 110mm (1.26 x 3.54 x 4.33 in)
Weight320g320g330g
InstallationDIN-Rail, Wall-Mount (optional kit)DIN-Rail, Wall-Mount (optional kit)DIN-Rail, Wall-Mount (optional kit)
Operating Temperature-10°C to +70°C (14°F to +158°F)-10°C to +70°C (14°F to +158°F)-10°C to +70°C (14°F to +158°F)
Storage Temperature-40°C to +85°C (-40°F to +185°F)-40°C to +85°C (-40°F to +185°F)-40°C to +85°C (-40°F to +185°F)
Ambient Relative Humidity5 to 95%, 55°C (non-condensing)5 to 95%, 55°C (non-condensing)5 to 95%, 55°C (non-condensing)
ModeMulti-modeSingle-mode-
Distance550M10KM-
Bit Rate1250Mbps1250Mbps-
Wavelength (nm)13101310-
Application1000Base-SX1000Base-LX-
Tx Power (dBm)-9.5 to -4-9.5 to -3-
Rx Sensitivity (dBm)< -18< -20-
SafetyCB (IEC62368-1/EN62368-1)CB (IEC62368-1/EN62368-1)CB (IEC62368-1/EN62368-1)
EMCFCC Part 15, Subpart B, Class A EN55032 EN61000-6-4 EN 61000-3-2 EN 61000-3-3 EN 55035 EN 61000-6-2FCC Part 15, Subpart B, Class A EN55032 EN61000-6-4 EN 61000-3-2 EN 61000-3-3 EN 55035 EN 61000-6-2FCC Part 15, Subpart B, Class A EN55032 EN61000-6-4 EN 61000-3-2 EN 61000-3-3 EN 55035 EN 61000-6-2
IEC 61000-4-2 (ESD)Contact Discharge: ±6KV, Level 3 Air Discharge: ±8KV, Level 3Contact Discharge: ±6KV, Level 3 Air Discharge: ±8KV, Level 3Contact Discharge: ±6KV, Level 3 Air Discharge: ±8KV, Level 3
IEC 61000-4-3 (RS)80-1000MHz: 10 V/m, Level 380-1000MHz: 10 V/m, Level 380-1000MHz: 10 V/m, Level 3
IEC 61000-4-4 (EFT)DC Power Port: ±2.0KV, Level 3 Signal Port: ±1.0KV, Level 3DC Power Port: ±2.0KV, Level 3 Signal Port: ±1.0KV, Level 3DC Power Port: ±2.0KV, Level 3 Signal Port: ±1.0KV, Level 3
IEC 61000-4-5 (Surge)DC Power Port: Line-to Line ±1.0KV, Level 3 Signal Port: Line-to Earth ±1.0KV, Level 2DC Power Port: Line-to Line ±1.0KV, Level 3 Signal Port: Line-to Earth ±1.0KV, Level 2DC Power Port: Line-to Line ±1.0KV, Level 3 Signal Port: Line-to Earth ±1.0KV, Level 2
IEC 61000-4-6 (CS)Conducted (Enclosure): 10 Vrms, Level 3Conducted (Enclosure): 10 Vrms, Level 3Conducted (Enclosure): 10 Vrms, Level 3
IEC 61000-4-8 (PFMF)(Enclosure): 50/60 Hz 30 A/m, Level 4(Enclosure): 50/60 Hz 30 A/m, Level 4(Enclosure): 50/60 Hz 30 A/m, Level 4
ShockMIL-STD-810F Method 516.5MIL-STD-810F Method 516.5MIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5MIL-STD-810F Method 516.5MIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2MIL-STD-810F Method 514.5 C-1 & C-2MIL-STD-810F Method 514.5 C-1 & C-2
RoHSYesYesYes
MTBF415,681.88 hrs / 47.45 years (25°C)415,681.88 hrs / 47.45 years (25°C)415,681.88 hrs / 47.45 years (25°C)
Warranty5 years5 years5 years

Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.

Support

Downloads

Datasheets
DescriptionDateTypeFile SizeDownload
DatasheetDatasheetPDF · 1.07mb-PDF1.07mb

Explore more

Related products