ONT200-01R

1GE+CATV ONT

In compliance with ITU-T G.984.1/2/3/4 and IEEE802.3ah standard
Support ONU auto-discovery/Link detection/remote upgrade of software
Support multiple registration methods
Support port VLAN configuration
Support MAC-address learning
Support port-based rate limitation and bandwidth control
Support broadcasting storm resistance function
Support remote management configuration
Support Dynamic Bandwidth Allocation (DBA)
Support AES encryption and decryption
Support remote CATV port management
EMS network management based on SNMP, convenient for maintenance
Support power-off alarm function, easy for link problem detection
Support port flow-control

Where to buy Download datasheet View specifications

Overview

ONT200-01R dual-mode ONU supports access in two modes: EPON and GPON. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.

ONT200-01R is based on the mature, stable gigabit Ethernet switching, WDM and HFC technology. It has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee, with the technical performance of the equipment meeting the ITU G.984 and IEEE802.3ah requirements, and it has good compatibility with mainstream GPON or EPON OLTs.

Specification
Typical Solution	FTTH
Typical Business	Internet, CATV
GPON/EPON Port	Single mode single fiber GPON: FSAN G.984.2 standard, Class B+ EPON: 1000BASE-PX20+ symmetric GPON: 2.488Gbps/1.244Gbps downstream/upstream EPON: 1.25Gbps downstream/upstream
Wavelength	Transmit: 1310nm Receiver: 1490nm
Receiving sensitivity	GPON: -28dBm EPON: -27dBm
Saturated power	GPON: -8dBm EPON: -3dBm
Transmitting power	GPON: 0.5~5dBm EPON: 0~4dBm
CATV (Input/Output port)	Wavelength: 1550nm RF frequency: 47MHz~1000MHz RF impedance: 75Ω Input optical power: -18dBm~0dBm(with AGC) RF output level: 78dBuV (@-12~-2dBm@85MHz) (with AGC) RF output return loss: >12dB(with AGC)
User Port(LAN)	RJ-45 connector 1*10/100/1000Mbps adaptive Ethernet port Full/half duplex Auto MDI/MDI-X
Indicators	PWR / PON / LOS / LAN / CATV / INT / OPT
Power	External 12VDC/0.5A power supply adapter Power consumption: <4.5W
Dimension and Weight	Item Dimension: 125mm(L) x 80mm(W) x 28mm (H) Item weight: 0.13kg
Environmental Specifications	Operating temperature: 0 to 40°C Storage temperature: -40 to 85°C Operating humidity: 10% to 90%(Non-condensing)
Management	EPON: OAM / WEB / TR069 / Telnet GPON: OMCI / WEB / TR069 / Telnet
Register	Auto-discovery/Link detection/Remote upgrade software Auto/MAC/SN/LOID+Password authentication
Switch	MAC address learning MAC address learning account limit Port flow control Broadcast storm suppression VLAN transparent/tag/translate/trunk
Multicast	IGMP V2 IGMP VLAN IGMP transparent/Snooping/Proxy
Security	Firewall MAC address/URL filter Remote WEB/Telnet access control
PWR (LED Definitions)	Power Status On: The ONU is power on Off: The ONU is power off
PON (LED Definitions)	ONU Register On: Success to register to OLT Blinking: In process of registering to OLT Off: Failed to register to OLT;
LOS (LED Definitions)	PON Optical Signals On: Optical power lower than receiver sensitivity; Off: Optical in normal
INT (LED Definitions)	Internet Status Indicator On: The routed WAN Internet access service is normal. Off: The routed WAN Internet access service is abnormal.
LAN (LED Definitions)	LAN Port Status On: Ethernet connection is normal Blinking: Data is being transmitted through the Ethernet port Off: Ethernet connection is not set up
CATV (LED Definitions)	CATV Status On: CATV optical normal Off: The CATV signals are not received
OPT (LED Definitions)	Light Intensity Indicator On: higher than ONU RX maximum threshold; Flashing: lower than ONU RX minimum threshold; Off: ONU RX is within the normal threshold range.
Ordering Information	FTTH/O ONT, 1 GPON/EPON interface (SC/APC), 1 Gigabit LAN port, CATV port

Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice.

Datasheets